Foam cannons activate and send a thick layer of suds over your vehicle using a 1000 ml reservoir. You can add your favorite car shampoo and or pre-rinse cleanser to the cannon using a suitable dilution ratio to your pressure washer setup. Once hooked up, use the adjustable dial on the head of the cannon to change the water to product ratio on the fly. Adjust the barrel by twisting its two part collar to change the fan size or change between vertical and horizontal spray patterns.
 
We recommend 100-150ml of product to water ratio in your reservoir for most setups. Check your foam filter and orifice for contamination buildup seasonally. Oftentimes, foam cannons will fail due to a buildup in their mesh filtering or a small contaminate parked in the first part of the housing. Easy to fix and troubleshoot. If your foam cannon isn't performing, we can walk you through the 10 min fix. 
 
Not foaming > Check Dial is adjusted (twist one direction then back the opposite direction while squeezing the trigger) > Check dilution ratio of the reservoir > Check for clog > Change to smaller Orifice (1:1)
 
Pre-rinse cleansers and after wash drying aids are a versatile way to use your cannon, we recommend rinsing out the housing after each use or when changing products to extend the life of the tool. Remove the cap assembly from the resevoir container, dip the pickup line in a bucket of fresh water and pull the trigger to cycle and rinse assembly.